The short answer
Start with a soft dry cloth, which is enough for most watches. Only use water if the watch is rated for it and the crown is pushed in or screwed down. Use a drop of mild soap and a soft brush on a metal case or bracelet, rinse lightly and dry it fully. Keep leather straps away from water.

Before you start
A few checks keep a clean from turning into damage.
- Look at the water resistance. It is usually printed on the case back or listed in the specs. If the watch has none, or the rating is low, do not put it under running water. Our guide on water resistance ratings explains what the numbers mean.
- Check the crown. Push it fully in, or screw it down if it screws. Never turn or pull the crown while the watch is wet.
- Check the strap. Metal and silicone can be washed. Leather cannot be soaked.
What you need
- A soft, lint-free cloth
- A soft brush, such as a clean baby toothbrush
- A small bowl of lukewarm water
- A drop of mild liquid soap
Skip solvents, alcohol, abrasive polish and household cleaners. They can dull finishes, damage plating and harm gaskets.
Step by step
- Wipe it dry first. Go over the case, crystal and strap with the dry cloth. For a lightly used watch, this may be all it needs.
- Mix the soap. Add one drop to the lukewarm water.
- Brush the case and bracelet. Dip the brush, shake off the excess and work around the case edges, lugs and bracelet links. Keep the brush damp, not dripping.
- Wipe off the soap. Use a cloth dampened with plain water. If the watch is water resistant, you can rinse it briefly under a gentle tap instead.
- Dry it fully. Pat it with the dry cloth and let it sit for a few minutes before you put it on or in a box. Trapped moisture can leave spots on a bracelet and in the links.
If the watch is not water resistant
Do not dip it or hold it under the tap. Wipe the case, crystal and bracelet with a cloth that is barely damp, then dry them right away. Keep moisture away from the crown, the buttons and the case back.
Cleaning by strap type
| Strap | How to clean it |
|---|---|
| Stainless steel bracelet | Soapy brush, plain-water wipe, dry fully. Use a toothpick wrapped in cloth for gaps between links. |
| Silicone or rubber | Wipe with a damp, soapy cloth, rinse and dry. |
| Leather | Wipe with a soft dry cloth. See how to care for a leather watch strap. |
What to leave to a professional
Do not open the case back at home. Dust or moisture inside, a fogged crystal or a watch that has stopped needs a watchmaker. Ultrasonic cleaners can harm some watches, so leave those to someone who knows your model.
A watch that is cleaned now and then also fits better, because a clean bracelet moves freely. Browse our wrist watches if you are choosing a new one.


